16GA SHARKSKIN TIE WIRE (20/BX)

Description

MAR-MAC PREMIUM Sharkskin Tie Wire’s textured coating provides a better grip, while the soft annealed wire core provides the pliable and easy to tie product expected from a MAR-MAC PREMIUM Tie Wire.  An adhesive layer is applied between the core and the HDPE coating to ensure coating integrity and long-lasting performance.

Key Features

• DRAWN, ANNEALED, COILED, & PACKAGED IN THE USA
• MEETS “BUY AMERICAN” & “BUY AMERICA” STANDARDS
• CONFORMS TO ASTM A853 SPECS
• PRODUCED WITH C1006 OR C1008 GRADE OF STEEL
• DEAD-SOFT ANNEALED
• COATED WITH A BONDED HIGH-DENSITY POLYETHYLENE (thickness is 7 mils +/-2)
• PACKAGED IN 3 LB. COILS, 20 COILS PER BOX, 60 LBS. PER CARTON, 48 BOXES PER PALLET
• 1 BOX PER 6.48 TONS OF REBAR
• OTHER NAMES: rebar tie wire, ty-wire, coil wire, coated wire
• Specifications:
  • Standard Requirements: Mar-Mac Industries, Inc. Premium Plastic Coated Coil Wire is drawn, annealed, coated, coiled, and packaged in the USA and complies with “Buy American” and “Buy America” standards. Mar-Mac Industries, Inc. Premium Plastic Coated Coil Wire conforms to the ASTM A853 specification and to the ASTM A775 specification, appendix section X1.3.13. (The AASHTO designation M-284M/M 284 has been superseded by ASTM A775). Mar-Mac Industries, Inc. Premium Plastic Coated Coil Wire also conforms to the requirements of “American Iron and Steel (AIS)” as outlined in provisions P.L. 113-76, the Consolidated Appropriations Act, 2014 and also conforms to the requirements of Division A, Title VII, Section 746 of the Consolidated Appropriations Act of 2017.
  • Chemical Requirements: Mar-Mac Industries, Inc. Premium Plastic Coated Coil Wire is produced using a C1006 or C1008 grade of steel as specified in ASTM A510 and ASTM A1040.
  • Physical Requirements: Core Wire - The core wire used to produce Mar-Mac Industries, Inc. Premium Coil Wire is annealed in a “dead soft” annealing cycle. The wire used is annealed to a tensile range of 40,000psi to 54,000psi. The final tensile range after processing and plastic coating will be 40,000psi to 60,000psi.
  • Coating: Mar-Mac Industries, Inc. plastic coated coil wire is coated with a bonded HDPE (High-Density Polyethylene). Polyethylene is considered a dielectric material with a dielectric constant of 2.25. The thickness of the coating is 7 mils +/- 2.